|
|
Sof’Shield Indoor recreation surface is designed specifically to meet the requirements of child care centers and indoor recreation. Sof’Shield’s unique interlocking connection combined with Sof’Bond Adhesive creates a virtually seamless floor covering that is easy to clean, non-permeable, and non-porous to prevent bacterial growth.
Out Lasts
• Performance Warranty
Sof’Shield Indoor is guaranteed to be in compliance
with ASTM F 1292-04 and F1951 for a full 6 years and
it is covered by the Play Protection Plan - designed to
provide a new level of confidence and protection.
• Product Warranty
Sof’Shield Indoor surfacing carries a 6 year limited
product warranty against defective materials and
manufacturer’s workmanship of the product.
• Innovative Wear Layer
Sof’Shield’s innovative wear layer is made using
virgin, lead free material. Its patent-pending design
is non-porous, self draining and anti-fungal. This
layer reduces wear patterns, color transfer and
bacterial growth.
• Sof’Bond™ Adhesion Process
When installed to the manufacturer’s specifications,
our Sof’Bond Adhesion process creates a strong
and seamless surface that will not curl, shift or allow
gaps to form between mats.
Out Shines
• Colorful – Maintains Clean Look
Its brighter, longer lasting UV resistant colors provide
superior stability and longevity. All 6 colors are the same
price. Custom colors are possible to create site-specific
designs.
• Durable
No granular surface can match the innovative design of
Sof’Shield’s non-porous, one-piece wear layer mat for
long-term durability and resistance to wear patterns.
• No Visible Scarring from Repairs
Unlike granular surfaces, Sof’Shield‘s modular design
allows repairs to be done easily. Using the Sof’Bond
Adhesion process the connection is as strong as the
original with no unsightly markings.
• Fade Resistant
The colorfast properties of Sof’Shield are superior to other
products since the UV resistant additives are built into the
wear layer. After exposure to the most extreme conditions,
there were no noticeable differences to any of the 6 colors.
Out Performs
• IPEMA Certification
Sof’Shield Indoor is certified by the industry’s leading
third party organization, IPEMA, to meet the ASTM
requirements for impact attenuation.
• Fall Height Protection — Up to 6’
Sof’Shield Indoor’s innovative combination of a durable
wear layer over our shock absorbing Sof’Impact Foam
provides you with guaranteed impact attenuation, plus
superior durability and long-term performance.
• Slip-Resistance
Ergonomically designed with a varied textured surface
and optimal drainage Sof’Shield Indoor is compliant to
ASTM F 1677 for slip resistance in both wet and dry
situations.
• Overlapping Interlocking Connection
Sof’Shield Indoor’s patent-pending overlapping
interlocking connection combined with the Sof’Bond
Adhesion process maintains a bond that will not gap or
separate even under the most extreme pressure.
Sof'Shield Indoor Warranty
Sof'Shield Indoor is backed by Sof'Solutions' Play Protection Plan™
The Best Surfacing Package in the Industry
Comprehensive Coverage Includes:
- Performance Warranty
- Liability Insurance - $10 Million
- IPEMA Certification
- World Class Customer Service
It's just another part of Sof'Solutions ongoing commitment to provide our customers with a 'Stress Less, Play More' recreation surface.
Just look for the Play Protection Plan shield - it's how you know you are getting
the best surfacing coverage in the industry.
What is Covered
- Sof’Solutions™ Incorporated warrants the Sof’Shield™ product to meet or exceed product guidelines and testing under normal use for SIX (6) YEARS from date of installation.
- Sof’Solutions™ also warrants all Sof’Shield components provided by Sof’Solutions™ to be free of defect given normal use up to SIX (6) YEARS from the date of installation.
Warranty Conditions
If the Sof’Shield Indoor™ installation is defective within the applicable warranty period, Sof’Solutions™ will, subject to the conditions set forth below, replace defective installation components at no charge within a reasonable period of time. Components that are used for replacement under this warranty are warranted for the remainder of the original warranty period. The replacement of defective components shall constitute the sole and exclusive remedy in the event of a breach of warranty.
Exclusions
This Warranty excludes any defect, malfunction or failure caused by or resulting from:
- Improper installation, including service or maintenance.
- Abuse, neglect, accident, vandalism.
- Improper drainage.
- Acts of God, or any other cause beyond the control of Sof’Solutions.
Failure to maintain area, install all materials properly or change impact attenuation characteristics due to sand or other foreign materials tracked into the system voids this warranty.
Disclaimer
Any implied warranties covering the Sof’Shield™ installation, including but not limited to warranties for merchantability or fitness for a particular purpose, are limited in duration to ninety (90) days from the date of original installation. Sof’Solutions™ shall not in any case be liable for special, incidental, consequential, indirect or other similar damages arising from breach of warranty, breach of contract, negligence or any other legal theory even if Sof'Solutions™ Inc. has been advised of the possibility of such damages.
Some states so not allow limitations on how long an implied warranty lasts or the exclusion or limitations of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights; you may also have other rights, which may vary from state to state.
Warrantor Sof’Solutions™ Incorporated
Installed By Local Crews
Once certified, installation can be done by
local crews allowing you to work with
installers you know and trust.
Pre-Fabricated Materials
All Sof'Shield Indoor components arrive
ready to install, there is no need for onsite
mixing or binding.
Add Layers To Increase Protection
Sof'Impact Foam’s thickness is specified to
meet varying critical fall heights. Simply
add additional layers to increase the amount
of fall height protection.
Available Fall Height Protection Systems: 4’, 6’
| Fall Height Protection |
Wear Layer Mat |
Geotextile Fabric |
Sof'Impact Foam Layer(s) |
| |
12”x24”x5/8”, 3.1 lbs |
|
1 1/2" |
2" |
2" LD |
| 1' |
X |
|
|
|
|
| 4' |
X |
X |
X |
|
|
| 6' |
X |
X |
|
X |
|
Physical Properties
| Test Description |
Test Ref |
Results |
| Wear Resistant |
ASTM D3884 |
1.64% loss after 3000 cycles |
| Slip Resistant |
ASTM F-1677 |
Dry 0.63, Wet 0.52 |
| Anti-Fungal 500 Hours QUV Exposure |
ASTM G-21-96 |
ASTM Rating 0=No Growth |
| Non-Flammable |
ASTM 2859 |
Passed |
| UV Resistant |
Q Panel QUV 3000 Hours |
<3.0 after 4,032 Kilojoules/square meter exposure |
| Non-Toxic |
ASTM 2075 |
Lead: ND=Not Detected |
Downloads
| Item |
Description |
File Type |
Size |
Download |
| One Page Flyer |
2 page, full color product information sheet |
PDF |
626KB |
Download |
 |
A link to the CadDetails site, containing detailed drawings of our products. |
  |
  |
CadDetails |
Request A Sample
Click here to get a sample.
|